Closing an ironing board is an important task, whether you are using it for daily ironing or only occasionally. Properly folding and storing an ironing board will make it last longer and save you time in the long run.
To close an ironing board, follow these steps:
- Lift the ironing board cover and iron rest to expose the hinge mechanism.
- Hold the ironing board with one hand and grasp the two halves of the hinge mechanism with the other hand.
- Pull the halves of the hinge mechanism apart slightly to release the locking mechanism.
- Fold the ironing board in half, with the iron resting on the inside.
- Hold the folded ironing board vertically and gently push the two halves of the hinge mechanism together until they lock in place.
- Some ironing boards may have a latch or lock to secure the hinge mechanism when the ironing board is closed. If your ironing board has a latch, close it to keep the ironing board in the closed position.
- Store the ironing board in a dry, upright position to prevent damage to the cover and hinge mechanism.
Note: If you have difficulty closing the ironing board, make sure that the cover and iron rest are fully raised and not blocking the hinge mechanism. If the ironing board still won’t close, it may be due to the hinges being too tight. In this case, you may need to use a lubricant, such as silicone spray, to loosen the hinges.
How to Store an Ironing Board Safely
To store an ironing board safely, follow these steps:
- Make sure the ironing board is clean and dry before storing it. Wipe down the cover and iron rest with a dry cloth to remove any moisture or debris.
- Close the ironing board according to the instructions provided in the previous answer.
- Stand the ironing board upright in a dry, well-ventilated area. Avoid storing the ironing board in damp or humid conditions, as this can cause rust and damage to the hinge mechanism.
- If you don’t have enough space to store the ironing board upright, you can also lay it flat on its side. Just make sure that the cover and iron rest are fully raised and not blocking the hinge mechanism.
- If you have a lot of other items stored in the same area as the ironing board, consider using a storage cover or bag to protect it from dust and scratches.
By following these steps, you can help ensure that your ironing board stays in good condition and is ready to use whenever you need it.
What Are the Types of Ironing Boards?
There are several types of ironing boards available, including:
- Freestanding ironing boards: These are the most common type of ironing board. They are typically made of a metal frame with a fabric cover and iron rest. They can be adjusted to different heights and are designed to be used on a flat surface.
- Tabletop ironing boards: These are small ironing boards that can be placed on a table or other flat surfaces. They are compact and lightweight, making them ideal for small spaces or for travel.
- Wall-mounted ironing boards: These ironing boards are mounted to a wall and can be folded up when not in use. They are a good option for people who don’t have a lot of storage space.
- Over-the-door ironing boards: These ironing boards are designed to be hung over a door and can be easily stored when not in use. They are a good option for people who don’t have a lot of space and don’t want to mount a wall-mounted ironing board.
- Built-in ironing boards: These ironing boards are permanently installed in a cabinet or other storage unit. They can be folded out when needed and tucked away when not in use. Built-in ironing boards are a good option for people who want a permanent ironing solution but don’t have a lot of space.
How to Close an Ironing Board With a Lever on the Floor?
The ironing board has a lever on the floor, this is the easiest way to close it. Simply move the lever up with your foot and the board will collapse into itself. Make sure to hold onto the handle while you do this so you don’t accidentally tip it over. Once the board is folded, it should remain securely closed until you need to use it again.
If your ironing board has a locking mechanism, you’ll need to use this to close the board. To do this, find the lever or button on the side of the board and press it. This will unlock the board so it can be folded up. Once it’s unlocked, simply press down on the sides of the board until it collapses into itself. Be careful not to press too hard, as this may cause damage to the board. Once the board is folded up, use the same lever or button to lock the board shut.
Things to know when closing an ironing board
Here are some things to keep in mind when closing an ironing board:
- Make sure the ironing board cover and iron rest are fully raised and not blocking the hinge mechanism.
- Hold the ironing board with one hand and grasp the two halves of the hinge mechanism with the other hand.
- Pull the halves of the hinge mechanism apart slightly to release the locking mechanism.
- Fold the ironing board in half, with the iron resting on the inside.
- Hold the folded ironing board vertically and gently push the two halves of the hinge mechanism together until they lock in place.
- Some ironing boards may have a latch or lock to secure the hinge mechanism when the ironing board is closed. If your ironing board has a latch, close it to keep the ironing board in the closed position.
- Store the ironing board in a dry, upright position to prevent damage to the cover and hinge mechanism.
Frequently Asked Questions (FAQs):
There are several different parts of an ironing board, including the cover, batting, legs, hinges, and mechanical latches.
To close a stuck ironing board, first, check if the hinges of the board are loose. You may be able to loosen any screws that are holding it in place and then gently pull the board together until it clicks shut.
An ironing board should always face away from you when closed so that the open end of the board is closest to you. This will prevent any stray items from accidentally falling onto the hot surface of the iron while in use.
